Skip to main content

FIND AUTO PARTS

This is a complete remote car key for Mazda. A great replacement for your old, worn-out or lost car key can also be a spare key. This replacement key is assembled and ready for programming. It includes a 3-button key shell case, uncut key blade, remote transponder and 433MHz chip, battery. 

 

Compatibility: 

  • Fits for Mazda 6 GH 2009 - 2012

NOTE: not suitable for Mazda 6 siemens VDO system.

 

Features:

  • 100% COMPATIBILITY: This is a complete remote key for Mazda.
  • READY FOR PROGRAMMING: This replacement key is assembled and ready for programming
  • GOOD QUALITY REPLACEMENT: Complete Remote Car Key replacement for a key with broken buttons, worn or lost key case
  • DURABLE KEY SHELL: Made of high-quality materials, highly durable. 
  • TRANSPONDER CHIP 433 Mhz includes remote control unlock and lock button

 

Specification:

  • FCC ID: SKE126-01, SKE126-A1, 2006DJ2777
  • Frequency: 433Mhz
  • Transponder Chip: 4D63 (80Bit)
  • Material: Plastic + Metal
  • Colour: Black
  • Button: 3 Buttons
  • Blade: MAZ24R Uncut (need to be cut in Locksmith)
  • Battery included
  • Fits Mazda 
  • Programming: by yourself

 

NOTES:

  • You will need to have at least one original working either black key or another remote key. It will not work if you have service grey key
  • You must check your key to ensure the part number is the same SKE126-01, SKE126-A1, 2006DJ2777 (to check, disassemble your original key down, do it this way if you are replacing the battery and check the number stamped on the remote.) 
  • The key will need to be cut and programmed by either a Locksmith or programmed yourself by following the instructions listed

 

Before a new key is programmed:  the new car key will need to be cut by a Locksmith (also you can program by either a Locksmith or yourself by following the instructions listed.) Car Key Programming instructions are presented below. Programming INSTRUCTIONS include two stages: 1) “How to program the remote control” and 2) How to program the car key to start (Programming the transponder chip)”

 

INSTRUCTIONS: 

1) How to program the remote control - Do it yourself:

  • 1. Open Driver side door
  • 2. Put the Original key in and out of ignition 2 times
  • 3. Close and open driver door 2 times
  • 4. Put Original Key in and out of ignition once
  • 5. Shut and open door twice
  • 6. Close door
  • 7. Insert key Turn ignition on
  • 8. Turn ignition off and remove key
  • 9. Door locks will cycle
  • 10. Press lock and unlock together for 1 second then lock button

(To delete remotes turn the key on and off 5 times, door locks will cycle 5 times. Turn the key on then off. Open shut door)

  • 11. Locks will cycle put key in ignition turn to on then off
  • 12. Remove key from ignition, close door and test remote

 

2) How to program your car key to start  (Programming the transponder chip) - do it yourself:

  • 1. Put Original master key in and out of ignition 5 times. Finish with key in ignition
  • 2. Open and shut door 6 times
  • 3. Remove original, insert new key
  • 4. Leave for 60 seconds (or till Security light goes out on dashboard)
  • 5. After 60 seconds security light stops flashing then you can start car.
  • 6. Take key out
  • 7. Open and shut door

 

Package Includes:

  • 1 X Complete Remote Car Key, 1х Battery 

Be The First To Review This Product!

Help other Aurus Australia Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review