This complete Remote Key for Suzuki Swift 2005 - 2010. High-quality replacement car key with transponder and chip, full assembly and ready to be programmed for your car. You can program the key yourself. Replace your old key or just make it a spare. Spec: ID46 Chip 433MHz TS004 HU87 Uncut 2 Button. It includes a 2-button key shell case, uncut key blade with battery.

• Fitment with the following models: Suzuki Swift 2005 - 2010

Specification:

• Buttons: 2
• Remote Frequency: 433MHZ
• FCC ID: KBRTS004
• Transponder Chip: ID46
• Blade: HU87 (UNCUT)
• Programming: by yourself
• No logo or part numbers on the remote key

Features:

• 100% COMPATIBILITY: This is a complete remote key for Suzuki.
• READY FOR PROGRAMMING: This replacement key is assembled and ready for programming
• GOOD QUALITY REPLACEMENT: Complete Remote Car Key replacement for a key with broken buttons, worn or lost key case
• DURABLE KEY SHELL: Made of high-quality materials, highly durable. 
• TRANSPONDER CHIP 433 Mhz includes remote control unlock and lock button
• PROGRAM YOURSELF: You can program the key yourself

Important Notices:

• Please pay attention this key compatible only for models with 433Mhz and FSK modulation (TS004, KBRTS004, 37145-55JU0 or 37145-55AJ0)
• Do not buy this key if your key has TS002 number on it, this key has the number TS004
• Please ensure all remotes (both old & new) are available with you to be trained at the same time.
• The key transponder chip programming requires the use of a scan tool and must be performed by an authorized locksmith or dealer
• Key blade will need to be cut (this key is UNCUT)
• Up to 3 remotes can be learned by the vehicle.

INSTRUCTIONS:

How to program the remote control - Do it yourself:

• 1. Sit in the vehicle with the driver’s door open and all other doors closed.
• 2. Insert your original key and turn it to the "On" position and back to "Off."
• 3. Close and open the driver's door three times. Insert and remove the key.
• 4. Wait for the locks to automatically cycle. Press and hold the "Unlock" button on your remote.
• 5. Hold the button until the locks cycle again. This completes the programming procedure

This procedure will program the remote, but you will need to have the key cut and transponder chip programmed at a locksmith shop or dealer.

Package Content:

• 1х Complete Remote Car Key, 1х Battery