Oxygen Sensor O2 Lambda for Ford direct replacement for your oxygen sensor, a small probe located on the car exhaust, between the exhaust manifold and the catalytic converter. The lambda probe, situated before the catalyses, permanently measures the quantity of oxygen present in exhaust gases to change the air-fuel mixture. Simple installation, compatible with OEM 0258986603, BA9F472A, 5W6Z9G444BA, BE5Z9G444A

 

Brand: acatana auto parts

Model: Oxygen Sensor O2

 

Compatibility fits for Ford:

 

• Ford Falcon XH Ute / Van 10/1997 - 8/1998 5.0L V8
• Ford Falcon AU 9/1998 - 8/2002 4.0L 6 cyl 5.0L V8 W
• Ford Falcon AU III W 11/2001 - 12/2002 5.6L V8
• Ford Falcon BA, BF 7/2003 - 7/2011 4.0L 6 Inc LPG & TURBO
• Ford Falcon BA, BF SOHC 24V 7/2003 - 4/2008 5.4L V8
• Ford Falcon BA DOHC 32V 9/2002 - 9/2005 5.4L V8
• Ford Falcon BF, FG DOHC 32V 10/2005 - on 5.4L V8
• Ford Falcon FG 2/2008 - on 4.0L 6 cyl Inc LPG & TURBO
• Ford Falcon FG 8/2010 - on 5.0L V8 S/C

• Ford Territory SX, SY, SZ 2004 - 2005 6Cyl 4.0L
• Ford Fiesta WS 2008 - 2010 4Cyl 1.4L 1.6L

• Ford Focus LR 2002 - 2005 4Cyl 1.8L 2.0L
• Ford Focus ST170 2002 - 2005 4Cyl 2.0L

• Ford LTD AU 1999 - 2002 6Cyl 4.0L 8Cyl 5.0L
• Ford LTD BA 2003 - 2005 6Cyl 4.0L 8Cyl 5.4L
• Ford LTD BF 2005 - 2007 6Cyl 4.0L 8Cyl 5.4L

• Ford Fairlane AU 9/1998 - 2/2003 4.0L 6 cyl 5.0L V8
• Ford Fairlane BA, BF 9/2002 - 12/07 4.0L 6 cyl
• Ford Fairlane BA, BF SOHC 7/2003 - 12/2007 5.4L V8

 

Compatible Reference OEM: BA9F472A, 5W6Z9G444BA, BE5Z9G444A, BOSCH part number 0258986603

 

Features:

• Simple installation, Plug & Play fast response
• It can improve engine efficiency performance and fuel economy, reduce CO2 and other emissions
• Stable characteristics and high reliability
• Manufactured to strict engineering quality and standards
• Ensure maximum strength and durability for long-term use

 

Specification：

• Matching plug: CPS-085
• Electrical connection: OE plug
• Number of pins/wires: 4
• Thread: M18 x 1.5

 

How to replace Oxygen Sensor O2 Lambda Probe

• Step 1: Let the engine cool before attempting to remove a sensor
• Step 2: Jack up the vehicle if you need to reach a sensor under it
• Step 3: Locate the oxygen sensor underneath the hood or vehicle
• Step 4: Disconnect the electrical connection to the oxygen sensor
• Step 5: Spray some penetrating oil onto the sensor to loosen it
• Step 6: Unscrew the oxygen sensor using a ratchet wrench
• Step 7: Select a new oxygen sensor that is the same as the old one
• Step 8: Add a small amount of anti-seize to the new sensor
• Step 9: Turn the sensor clockwise to secure it on the exhaust line
• Step 10: Plug the electrical connector back into the vehicle
• Step 11: Start the car to see if the problem is fixed

 

Package Included: 1x Oxygen Sensor O2 Lambda Probe