This is a complete remote key for Toyota. A great replacement for your old, worn-out or lost car key can also be a spare key. This replacement key is assembled and ready for programming. It includes a 2-button key shell case, uncut key blade, remote transponder and G chip, and battery. 

 

Compatibility for Toyota Corolla 10/2009 - 08/2012

 

Note: Frequency: B41TA only（Not suit for B41TH）

 

 

Features:

 

• 100% COMPATIBILITY: This is a complete remote key for Toyota.
• READY FOR PROGRAMMING: This replacement key is assembled and ready for programming
• GOOD QUALITY REPLACEMENT: Complete Remote Car Key replacement for a key with broken buttons, worn or lost key case
• DURABLE KEY SHELL: Made of high-quality materials, highly durable. 
• TRANSPONDER G CHIP includes remote control unlock and lock button

 

NOTES:

• **The key blade will need to be cut (this key is UNCUT)
• **You will need to have it cut and programmed by your local professional Automotive locksmith or car dealer using diagnostic key programming equipment
• ** Please check the FCC ID of your key B41TA only（Not suit for B41TH）

 

Specification:

• Color: Black
• Button: 2 Buttons
• Key Blank: Yes
• Transponder Chip: G
• Electronics / Battery: included
• Frequency: B41TA（Not B41TH）
• for Toyota 

 

Remote programming procedure - do it yourself:

• 1. Open the driver-side door
• 2. Put the Original key in and out of the ignition 2 times
• 3. Close and open the driver's door 2 times
• 4. Put the Original Key in and out of the ignition once
• 5. Shut and open the door twice
• 6. Close door
• 7. Insert key Turn the ignition on
• 8. Turn the ignition off and remove key
• 9. Door locks will cycle
• 10. Press lock and unlock together for 1 second then the lock button
• (To delete remotes turn the key on and off 5 times, door locks will cycle 5 times. Turn the key on and then off. Open shut door)
• 11. Locks will cycle put the key in the ignition turn it on then off
• 12. Remove the key from the ignition, close the door and test the remote

 

Transponder chip programming - do it yourself

• 1. Put the Original master key in and out of the ignition 5 times. Finish with the key in the ignition
• 2. Open and shut door 6 times
• 3. Remove the original, insert the new key
• 4. Leave for 60 seconds (or till the Security light goes out on the dashboard)
• 5. After 60 seconds security light stops flashing then you can start the car.
• 6. Take the key out
• 7. Open and shut the door

 

Package Includes:

• 1 X Complete Remote Car Key, 1х Battery