x2 ABS Wheel Speed Sensor For Holden Statesman WM Commodore VE direct replacement of Rear Left or Right Wheel Speed Sensor, fix the problem with anti-lock braking system, prevents leaving your wheels at risk of locking, recives ABS control module data about your vehicle's wheel speed

 

Compatibility:

• Holden Commodore VE with ABS 2006 - 2013
• ALL Holden Commodore VE series 1

• Holden Statesman WM with ABS
• WM Series V6 V8 SS SV6 SSV SV8
• Only Statesman, Caprise, Omega, Berlina, Calais, Lumina, Equipe, International, 50th Anniversary Sedan, Wagon and Ute Models

 

Position: Rear Left or Right 

 

Compatible Reference OEM: 92211237, ALS2106, FSS241, WSS008, 5S11266, SU12719

 

Features:

• Plug & Play installation, fast response
• Stable characteristics and high reliability
• Manufactured to strict engineering quality and standards
• Ensure maximum strength and durability for long-term use

 

Specification：

• Color: Black
• Material: ABS Plastic
• Pin Counts: 2 pins
• Type: ABS Sensor
• Position: Rear Left or Right 

 

Note: Replacing an ABS sensor is not a difficult task, but it's one that should be left to a professional. They'll have the tools and knowledge necessary to do the job right

 

How to replace speed sensor:

• STEP 1: Before you jack the vehicle up for wheel speed sensor replacement, use a half-inch drive breaker bar along with a lug nut socket set to pull the lug nuts loose.
• STEP 2: Now use the jack to lift your vehicle up in the air and place stands to keep it in position. 
• STEP 3: The next step is to remove the old speed sensor. 
• STEP 4: Get a new wheel speed sensor and brake parts. Repeat step 3 in reverse order. Plug in the new connector and route the harness back so it is secured to the vehicle body. Insert it into the hub or the knuckle.
• Keep the wheel speed sensors clean regularly
• STEP 5: Now that you have replaced the speed sensor, it’s time to reinstall the wheels. Using the lug nuts, simply place the wheels back onto the wheel hub assembly and snug them down with a ratchet and socket.
• STEP 6: Place the jack in the correct spot under the vehicle, lift the car up, and remove the jack stands. Now you can lower the vehicle back to the ground.
• STEP 7: You have to rotate the wheels back. Most car models use a torque from 36 kgs to 45 kgs whereas SUVs and trucks use anywhere from 41 kgs to 54 kgs. As done earlier, use a half-inch torque wrench to twist the lug nuts to their proper specification.
• STEP 8: Take your vehicle out on a test drive. You will have to remember that after you replace a wheel speed sensor, the dashboard lights should turn off. Otherwise, take your vehicle to a certified mechanic and have them reset the internal computer. For a test drive, go down a safe road, speed up, and hit the brakes hard to ensure the ABS is working properly.

 

Package Included: 2x ABS Wheel Speed Sensor