This is a complete remote car key for Toyota. A great replacement for your old, worn-out or lost car key can also be a spare key. This replacement key is assembled and ready for programming. It includes a 2-button key shell case, uncut key blade, remote transponder and 433MHz chip, battery. 

 

Fitment with following models:

• Toyota Yaris 10/2005 to 09/2008 Series NCP90R, NCP91R, NCP93R
• Toyota Hilux 03/2005 to 09/2009 Series TGN16R, GGN15R, GGN25R, KUN26R

 

Please Note: This key is not suitable for the models which use G-Chip keys

 

Specification:

• Chip 4D67
• FCCID B41TA
• Frequency 433Mhz 
• Key blade TOY43
• Button: 2 Buttons
• Battery included
• Fits Toyota 
• Material: Plastic + Metal
• Colour: Black

 

Features:

 

• 100% COMPATIBILITY: This is a complete remote key for Toyota.
• READY FOR PROGRAMMING: This replacement key is assembled and ready for programming
• GOOD QUALITY REPLACEMENT: Complete Remote Car Key replacement for a key with broken buttons, worn or lost key case
• DURABLE KEY SHELL: Made of high-quality materials, highly durable. 
• TRANSPONDER CHIP 433 Mhz includes remote control unlock and lock button

 

 

Package Content:

• 1 X Complete Remote Car Key, 1х Battery 

 

NOTES:

• This remote key will not work if you have a service grey key
• To check this is the correct key for your car you can pop open your existing key case cover and check the number stamped on the remote. Part number should be B41TA 
• This key is not compatible with the remote key case cover which has "B41TH" stamped on the remote part number.
• This key is not compatible with the remote key which has "G" stamped on the key blade near the case.
• The key blade will need to be cut (this key is uncut)
• For programming, you must have one original working remote key at least

 

Please follow the recommended instructions!

 

How to program the remote control - Do it yourself:

 

Preparatory steps

With key out of the ignition sit in driver seat with driver door opened.

 

• 1. Within 5 seconds: Insert and remove the key from the ignition switch twice (in, out, in, out)
• 2. Within 40 seconds: Close and open driver’s door twice. Insert and remove the key from the ignition switch (in, out)
• 3. Within 40 seconds: Close and open driver’s door twice. Insert the key into the ignition switch and close the driver’s door
• 4. Within 40 seconds: Switch ignition ON and OFF once
• 5. Remove the key from ignition switch. System should now lock and unlock vehicle once
• 6. Within 45 seconds. Press and hold LOCK and UNLOCK button simultaneously for 1.5 seconds
• 7. Within 3 seconds: Press and release LOCK or UNLOCK button
• 8. System should now lock and unlock vehicle once to confirm programming, twice to indicate programming has failed
• 9. Within 45 seconds: Repeat steps 6-7 to program remaining remote transmitters
• 10. Open driver’s door to exit programming mode

NOTE: A maximum of 4 key remote transmitter can be programmed.

To delete all programmed remotes: at Step 4, switch the ignition ON and OFF five times, locks will cycle five times. Switch the ignition ON and OFF. Open and close the driver's door.

 

 

How to program remote control key - do it yourself:

 

• 1. Put the original master key in and out of the ignition 5 times. Finish with the key in the ignition
• 2. Open and close the driver's door 6 times
• 3. Remove original key from the ignition, insert the new key
• 4. Leave the new key in the ignition for 60 seconds (or till the Security light goes out on the dashboard)
• 5. After the security light stops flashing you can start the car with the new key
• 6. Remove the new key from the ignition
• 7. Open and close the door